Products | Binary offshore sensors ..Bin..-CT / ..-OCT 
Seawater resistant, binary sensors for Ex- or safe area
Offshore/marine coated, some parts in stainless steel / nickel-plated
Measurements in mm
Description – Offshore/marine coated binary diff.pressure switch ..Bin-P..-CT
- ExBin-P..-CT, RedBin-P..-CT and InBin-P..-CT pressure switches with
an excellent resistance to chemicals and sea water for HVAC systems,
e.g. for differential pressure control for filter- or fan belt monitoring - Aluminium housing offshore/marine coated, seawater resistant
- Sensor connection and cable glands Ex-e approved, nickel-plated,
screws in stainless steel 316L - No additional module in the panel required
- No intrinsically safe wiring required
- All parameters adjustable on site w/o additional tools/meas. devices
Technical data
Measurement range*Setting range / switch-point*Safe overload*Electric supplyCable glandsCable entryOutputDisplay
Protection / Housing materialAmbient temperature / -humidityPower supplyWeightExBin-P..-CT / RedBin-P..-CT for allInstallation of ExBin-P..-CTInstallation of RedBin-P..-CTInstallation of InBin-P..-CT*depending on type
..Bin-P..-CT
0...500 Pa, 0...5.000 Pa1-channel or 2-channel adjustable5.000 Pa...50.000 Pa24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mmPotential free switching contact adjustable per menuLCD Backlight, defeatableSwitching status LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)
to the technical data sheetsDelivery – ..Bin-P..-CT
- Offshore/marine coated, seawater resistant pressure switch
..Bin-P..-CT with integrated Ex-e terminal box - 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
- 1 × Short circuit tube ca. 140 mm length
Special models – ..Bin-P..-2-CT
- Offshore/marine coated, seawater resistant, pressure switch with two switching outputs (2 × potential free contacts)
Accessories – ..Bin-P..-CT
- Mounting bracket for round air ducts up to Ø 600 mm
- Installation kit with 2 m flexible pressure hose Ø 6 mm
- Stainless steel pressure tube connection for 6 mm clamp fittings
- M16 standard cable glands in brass nickel plated
- M20 Ex-d cable glands in brass nickel plated for armoured cables
(Offshore applications)
Measurements in mm
Variations of clamping ring connections in stainless steel
optionally available
Description – Offshore/marine coated, differential pressure switch ..Bin-P..-OCT
- ExBin-P..-OCT, RedBin-P..-OCT and InBin-P..-OCT pressure switches with
an excellent resistance to chemicals and sea water (Offshore version) for HVAC systems, e.g. for differential pressure control for filter- or fan belt monitoring - Aluminium housing offshore/marine coated, seawater resistant
- Cable glands Ex-e approved, nickel-plated, tubes for clamping ring
Ø 6 mm and screws in stainless steel 316L - No additional module in the panel required
- No intrinsically safe wiring required
- All parameters adjustable on site w/o additional tools/meas. devices
Technical data
Measurement range*Setting range / switch-point*Safe overload*Electric supplyCable glandsCable entryOutputDisplay
Protection / Housing materialAmbient temperature / -humidityPower supplyWeightExBin-P..-OCT / RedBin-P..-OCT for allInstallation of ExBin-P..-OCTInstallation of RedBin-P..-OCTInstallation of InBin-P..-OCT*depending on type
..Bin-P..-OCT
0...500 Pa, 0...5.000 Pa1-channel or 2-channel adjustable5.000 Pa...50.000 Pa24 VAC / DCM20 × 1,5 / Ex-e approved, nickel-platedØ 6...13 mmPotential free switching contact adjustable per menuLCD Backlight, defeatableSwitching status LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)
Delivery – ..Bin-P..-OCT
- Offshore/marine coated, seawater resistant pressure switch (Offshore version) ..Bin-P..-OCT with integrated Ex-e terminal box
- 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
- 1 × Short circuit tube ca. 140 mm length
Special model – ..Bin-P..-2-OCT
- Offshore/marine coated, seawater resistant, Offshore pressure switch with two switching outputs (2 × potential free contacts)
Accessories – ..Bin-P..-OCT
- Mounting bracket for round air ducts up to Ø 600 mm
- Installation kit with 2 m flexible pressure hose Ø 6 mm
- Stainless steel pressure tube connection for 6 mm clamp fittings
- M16 standard cable glands in brass nickel plated
- M20 Ex-d cable glands in brass nickel plated for armoured cables
(Offshore applications)
Measurements in mm
Description – Offshore/marine coated frost protection thermostat ..Bin-FR..-CT
- ExBin-FR..-CT, RedBin-FR..-CT and InBin-FR..-CT are frost protection thermostats for HVAC systems with an excellent resistance to chemicals and sea water, e.g. frost protection monitoring of heating registers /
heat exchangers - Aluminium housing offshore/marine coated, seawater resistant
- Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
- No additional module in the panel required
- No intrinsically safe wiring required
- Switch-point mechanically adjustable
Technical data
Temperature rangeSetting range / switch-pointCapillary*Electric supplyCable glandsCable entryMin. reaction length of capillaryOutputDisplayProtection / Housing materialAmbient temperature / -humidityPower supplyWeightExBin-FR..-CT / RedBin-FR..-CT for allInstallation of ExBin-FR..-CTInstallation of RedBin-FR..-CTInstallation of InBin-FR..-CT*depending on type..Bin-FR..-CT
-10 °C...+15 °C1-stage (1-channel)3 meters or 6 meters24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mm~ 40 cm1 potential-free contactSwitching status with LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)Delivery – ..Bin-FR..-CT
- Offshore/marine coated, seawater resistant frost protection thermostat with integrated Ex-e terminal box and 3 m or 6 m capillary (dependent by type)
- 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
Accessories – ..Bin-FR..-CT
- Cappillary duct, assembly cramp and 4 assembly brackets for ..Bin-FR-3
- Cappillary duct, assembly cramp and 8 assembly brackets for ..Bin-FR-6
- Mounting bracket for round air ducts up to Ø 600 mm
- M16 standard cable glands in brass nickel plated
- M20 Ex-d cable glands in brass nickel plated for armoured cables
(Offshore applications)
Description – Offshore/marine coated thermostat / hygrostat ..Bin-D..-CT
- ExBin-D..-CT, RedBin-D..-CT and InBin-D..-CT for use as thermostat or hygrostat together with ExPro-B.. sensor in HVAC systems, with an excellent resistance to chemicals and sea water atmosphere
- Aluminium housing offshore/marine coated, seawater resistant
- Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
- No additional module in the panel required
- No intrinsically safe wiring required
- Selectable on site if used for room or duct application
- Switch-point for °C and %rH is separately adjustable (dependent on
sensor type) - Adjustable directly on site without additional tools / meas. devices
Technical data
Measurement range Temperature*Measurement range Humidity*Application*Electric supplyCable glandsCable entryConnectable sensorOutputDisplay
Protection / Housing materialAmbient temperature / -humidityPower supplyWeightExBin-D..-CT / RedBin-D..-CT for allInstallation of ExBin-D..-CTInstallation of RedBin-D..-CTInstallation of InBin-D..-CT*depending on sensor type
..Bin-D..-CT
-40 °C...+125 °C0...100 %rHRoom- and / or Duct-measurement24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mm1 × ExPro-B.. (1 × InPro-B.. by InBin-D-CT)Potential free switching contact adjustable per menuLCD Backlight, defeatableSwitching status LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)
Delivery – ..Bin-D..-CT
- Offshore/marine coated, seawater resistant module with
integrated terminal box and socket for one ExPro-B.. sensor - 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
- Required accessory: ExPro-B.. sensor, InPro-B.. for InBin-D-CT
Special models – ..Bin-D-2-CT
- Offshore/marine coated, seawater resistant module with 4-stage
output (4 pot.-free contacts = 2 × °C, 2 × %rH)
Accessories – ..Bin-D..-CT
- ExPro-B.. sensors for ExBin-D/RedBin-D modules,
InPro-B.. sensors for InBin-D modules - Mounting bracket for round air ducts up to Ø 600 mm
- M16 standard cable glands in brass nickel plated
- M20 Ex-d cable glands in brass nickel plated for armoured cables
(Offshore applications)
Description – Offshore/marine coated switching amplifier module ..Bin-A..-CT
- ExBin-A..-CT and RedBin-A..-CT are switching amplifier modules for direct mounting in Ex areas for HVAC systems (Heating, Ventilating and Air Conditioning) with an excellent resistance to chemicals and sea water
- InBin-A..-CT for mounting in safe area (industrial applications)
- Aluminium housing offshore/marine coated, seawater resistant
- Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
- Connection of 1 up to 2 passive, potential-free binary sensors
- No additional module in the panel required
- No intrinsically safe wiring required
Technical data
Electric supplyCable glandsCable entrySensor(1-2 passive, potential-free, binary sensors
type ExSens)
OutputDisplayProtection / Housing materialAmbient temperature / -humidityPower supplyWeight*ExBin-A..-CT / RedBin-A..-CT for allInstallation of ExBin-A..-CTInstallation of RedBin-A..-CTInstallation of InBin-A..-CT*depending on type
..Bin-A..-CT
24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mmThermostats TBR-2.., TBK.., TBT..Humiditystats FBR-2G.., FBK-2G..
Diff. pressure switch DBK..,
Air flow switch WFBK-2G..
Frost protection thermostat TBK-FR-2G..Potential-free switching contactActual value indication LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)
Delivery – ..Bin-A..-CT
- Offshore/marine coated, seawater resistant switching amplifier module
with socket for 1 or 2 binary ExSens sensors (depending on amplifier type) - 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
- Optional accessory: Binary sensors series ExSens
Accessories – ..Bin-A..-CT
- Mounting bracket for round air ducts up to Ø 600 mm
- M16 standard cable glands in brass nickel plated
- M20 Ex-d cable glands in brass nickel plated for armoured cables
(Offshore applications)
